Please note that there is no minimum order quantity if collected from the stocking branch. Please use our 'check branch stock' link.

The strength and durability of porcelain meets the natural beauty and warmth of timber. Wood graining and knots blend together to create the warm characteristic of weathered timbers.

Deckwood porcelain paving has significant advantages over timber decking in that it is lower-maintenance and not slippy to walk on when wet. Ideal projects include smaller areas where the planks can be laid in creative patterns such as 'herringbone' or 'checker board' as well as a simple 'decking' pattern. Deckwood porcelain patio tiles will not be affected by the seasonal weather changes and will be not deteriorate in freezing weather conditions that can see some stone surfaces deteriorate gradually. Deckwood porcelain patio tiles are resistant to acid and alkali chemicals such as fertilizers and lawn treatments. Moss and algae cannot get established, as they can on stone or wood.

Deckwood porcelain patio tiles will not experience colour fading. Blacks will stay black, not turn to grey, light colours will stay faithful and will not turn grey/brown. In summary they will stay looking aesthetically as laid for many years with minimal cleaning maintenance.

• Size: 1200 x 295 x 20mm
• Colour: Buff
• Not affected by seasonal weather changes
• Resistant to acid and alkali chemicals
• R11 anti-slip finish

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.