
Growtivation GravelRings Black Stabilisation Grid (500 x 500 x 25mm)
Growtivation GravelRings Black Stabilisation Grid (500 x 500 x 25mm)

Growtivation GravelRings Black Stabilisation Grid (500 x 500 x 25mm) is a fully permeable gravel retention system for SuDS-compliant schemes, made from 100% recycled, UV-stabilised HDPE. The 500mm square, 25mm-deep modules are laid over a suitable stone sub-base and filled with loose aggregate or gravel.
Key features
- Permeable design: suitable for SuDS-compliant schemes
- Gravel retention: helps prevent stone migration and deep ruts
- Integral mesh base: lets fines pass while keeping gravel in place
- Flexible grid: follows the contours of your driveway
- 100% recycled material: helps make use of recycled plastic
Please note
These modules are made from 100% recycled, UV-stabilised HDPE and are chemical resistant. Use a suitable stone sub-base and fill with 620mm angular quarried aggregate only; marine-washed, rounded and mixed aggregates should not be used. Gravel demand is 5867kg per m. The stated load-bearing capacity of over 350 tonnes per m applies when the cells are filled with 620mm angular gravel to 15mm above the top of the cells.
Can GravelRings be used for paths as well as driveways?
Yes. The system is described for gravel driveways and paths, including use in SuDS-compliant schemes.
What type of gravel should I use?
Use 620mm angular quarried aggregate. Marine-washed, rounded and mixed aggregates should not be used.
Before you install
- Prepare a suitable stone sub-base.
- Lay the 500mm 500mm modules over the sub-base.
- Clip the modules together using their integral clipping mechanism.
- Fill the cells with the recommended aggregate; the stated load-bearing capacity requires gravel to reach 15mm above the top of the cells.
