Add a touch of personalisation and style to your outdoor space with Pavestone Anthracite Porcelain Setts. These versatile setts can be used to create borders, fill in between different sizes of paving, or to add unique patterns and features to your garden.

Enhance the look and functionality of your outdoor space with Pavestone Anthracite Porcelain Setts. Easy to install and durable, these setts will add character and charm to any garden.

• Dimensions: 200mm x 100 x 20mm
• 5 setts to a linear metre
• COVERAGE: 1000mm x 160mm
• Sawn edges for a neat and uniformed edging tile, or bullnose for a more decorative edge
• Priming Slurry must be used during installation to ensure a strong bond between the tile and bedding mortar
• Flexible Jointing Grout recommended for jointing the paving

Please note:  Porcelain Sett tiles are rectified to give a calibrated, dimensional accuracy. This enables closer jointing so that the tiles can appear as one large uninterrupted, seamless surface of stone flooring.

A rectified floor tile is one whose edges are perfectly vertical with respect to it's surface. This is a result of precise machining of a regular unrectified tile, so that each of the four sides will be at a 90 angle to the top and bottom faces of the tile.

Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.