Please note that this product is currently out of stock due to delayed shipping. Estimated arrival time is 11th May.

Please note that there is a 5 working day lead time for this product.

Introducing the Pavestone Evo Porcelain Paving range, designed to seamlessly blend the beauty of natural stone with modern functionality.

These high-quality tiles, sized at 900mm x 600mm and crafted at a convenient 16mm thickness, offer easier handling and installation while being an eco-conscious choice with a 20% reduction in cost, CO emissions, and energy consumption. Flaunting an impressive R11 anti-slip rating, they prioritize safety alongside style. Perfect for outdoor spaces and garden areas, these tiles maintain their vibrant colour and are resistant to seasonal weather changes, frost, and chemical exposure. The textured stone effect finish and square edge profile add a sophisticated, modern edge to any setting, ensuring your outdoor spaces are both beautiful and practical.

• Size: 900 x 600 x 16mm
• Application: Outdoor paving, garden spaces
• Eco-friendly: 20% reduction in CO emissions
• R11 Anti-slip rating for safety
• Frost-resistant: Withstands seasonal changes
• Chemical resistant; easy maintenance
• Retains colour; no fading over time
• Textured stone effect with square edge

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.