Please note that there is a 5 working day lead time for this product.

Transform your outdoor space effortlessly with Rustic Ardesia Porcelain Paving Tiles, which artfully blend the natural beauty of slate with the superior durability and low maintenance of porcelain. These tiles showcase a textured stone-effect finish and square edges, adding authentic warmth and character to any outdoor area.

The R11 anti-slip finish ensures safety, even in wet conditions, and their frost-resistant nature allows them to withstand seasonal weather changes without deteriorating. Unlike natural stone, these tiles are resistant to acid and alkali chemicals, protecting them from common household products like fertilizers and lawn treatments. They also ward off moss and algae, keeping their vibrant colours intact year after year, ensuring a low-maintenance and visually striking outdoor environment.

• Size: 900 x 600 x 20mm
• Covers an area of 22.68 m
• Textured stone-effect finish
• Square edge profile
• Frost resistant and durable
• R11 anti-slip finish for safety
• Resistant to chemicals, moss, and algae
• Maintains vibrant colour without fading

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.